heartleaf philodendron in water care Philodendron hederaceum “Heartleaf”
SKU: 81028200461
heartleaf philodendron in water care

heartleaf philodendron in water care Philodendron hederaceum “Heartleaf”

$24.53 $27.25
Save 10%
No.2 Bestseller on www.speak-africa.com >

Pay in installments of $6.81 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 1 - Jul 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

heartleaf philodendron in water care Philodendron hederaceum “Heartleaf”The Heartleaf Philodendron (Philodendron hederaceum) is a popular, low maintenance vining plant known for its glossy, heart shaped, solid green leaves. It is perfect for adding a lush, tropical feel to any space and makes a fantastic addition to bioactive setups for terrariums, vivariums, or paludariums due to its easy care nature and ability to thrive in various conditions. Care Instructions LIGHT. Prefers bright, indirect light but can tolerate

The Heartleaf Philodendron (Philodendron hederaceum) is a popular, low-maintenance vining plant known for its glossy, heart-shaped, solid green leaves. It is perfect for adding a lush, tropical feel to any space and makes a fantastic addition to bioactive setups for terrariums, vivariums, or paludariums due to its easy-care nature and ability to thrive in various conditions.

Care Instructions

LIGHT. Prefers bright, indirect light but can tolerate lower light levels. However, its growth may slow, and the leaves might lose some of their vibrancy in low light. In a bioactive setup, place it near a light source but avoid direct sunlight, which could scorch the leaves.

SOIL. A well-draining, loose soil mix is ideal. A blend of coconut coir, perlite, and orchid bark will help maintain aeration and proper drainage, which is essential for healthy root growth. In a bioactive environment, this mix will also allow decomposers like isopods and springtails to thrive by breaking down organic matter and enriching the substrate.

WATERING. Keep the soil consistently moist but not soggy. Let the top 1-2 inches dry out between waterings. In bioactive setups, the decomposers (springtails and isopods) will help balance moisture levels by consuming excess organic matter, which helps prevent over-watering. Avoid leaving the soil overly wet for extended periods.

HUMIDITY. Being a tropical plant, the Heartleaf Philodendron thrives in high humidity, making it ideal for bioactive setups. Aim to keep humidity levels above 60% to encourage healthy, lush growth.

TEMPS. Prefers warm temperatures between 65°F and 80°F (18°C to 27°C). Avoid placing it in drafty areas or areas with cold temperatures to prevent stress.

FERTILIZATION. During the growing season (spring and summer), feed with a balanced liquid fertilizer every 4-6 weeks. You can also use our dissolvable Mealworm Frass, produced by our mealworm colonies and enriched with a variety of vegetation, as a nutrient-pumped fertilizer. In the winter, reduce feeding as growth slows down.

Cohabitation with Bioactive Organisms

ISOPODS. Isopods are ideal for a Heartleaf Philodendron setup. These decomposers will break down dead plant matter, fallen leaves, and uneaten food, helping to maintain soil health and nutrient levels. The plant also benefits from the organic material provided by the isopods.

SPRINGTAILS. Springtails are great companions for Heartleaf Philodendron in bioactive setups. They help maintain soil health by consuming mold, fungi, and decaying organic matter. Their constant activity helps keep the environment clean while benefiting the plant by breaking down organic matter into nutrients.

Soil and Maintenance Tips

SUBSTRATE. A loose, well-draining mix is crucial. Use a combination of coconut coir, orchid bark, and perlite to allow for root aeration while ensuring that decomposers have the proper environment to thrive. You can also add a layer of activated charcoal at the bottom for better filtration and odor control.

HUMIDITY CONTROL. If needed, increase humidity by incorporating a shallow water dish or misting lightly once a day. The springtails and isopods will help keep the soil moist, and your plant will benefit from the additional humidity.

TRIMMING. Heartleaf Philodendron grows quickly and can be easily trimmed to maintain a neat appearance or encourage fuller growth. Periodically trim the vines to keep them in shape. You can propagate cuttings in water or soil, which is a great way to expand your collection.

PEST CONTROL. This plant is generally pest-resistant, but in a bioactive environment, springtails and isopods will help control minor pests such as mealybugs or aphids by feeding on their eggs or larvae.


With its vibrant, glossy, heart-shaped leaves, the Heartleaf Philodendron is a beautiful and resilient addition to any bioactive setup. It thrives alongside decomposers like isopods and springtails, which contribute to a healthy, nutrient-pumped environment. By mimicking its tropical habitat with proper humidity, light, and well-draining soil, you’ll create a thriving ecosystem where both your plants and bioactive creatures can flourish.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 81028200461

Discover Niche Categories That Outsell heartleaf philodendron in water care

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 1484 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tesseract in Blue Jeans
Charlottesville, US
★★★★★ 4
Better Than Expected
Color: Black, Color: Black
Initial impressions: The chair is better quality than I expected. The seat material is nice: feels firm but soft; better than those seats with faux leather. So far, it is comfortable even for being over 200 lb and over 6 feet tall. Many parts are sturdy metal, which is much better than plastic. The base that holds the wheels may be a form of plastic, but it is dense and feels strong; almost like metal. The chair frame appears to be a firm plastic too, but not thin, so my initial thought is it will last. It has a buffed texture [not shiny or smooth -- which to me is nice, because it makes it look and feel more solid and not cheap. The one weak point in design, in my opinion, is the cover that fits over the raising post: it feels a bit flimsy. Regardless, it probably wouldn't be noticeable to most unless they get down on the floor and squeeze it. Nevertheless, that there is a cover that raises and lowers like a telescope-- to "hide" the post, is a nice added attribute. A customer could leave the that cover off if they prefer, but I like it. I appreciate that the casters stay in place (unlike the other chair I tested: the KK Toner Round Rolling Stool, whose wheels do not stay in place). This makes it possible to lift the chair without fear of dropping casters. The casters are replaceable too, which is good. I was able to use Lifelong brand casters, instead, which are purportedly safe for hardwood and marble floors. The seat is stationary once attached. It is mostly upright [not leaning back]. Even with its mesh backing it is firm. This is not a plush, rocking chair type of product, yet it is comfortable. Instructions: As seems to be the new trend, they were mostly pictures without words. Regardless, putting the chair together was quite easy. Just make sure you doube check the front versus back of the seat -- this is important for setting the metal lift connector in place. And, don't forget to put the holding ring and washer on the screws. They add an extra screw for the connector, and an extra screw, washer, and pressure ring for the back attachment. That was a pleasant surprise; and is appreciated. The raising and lowering mechanism works well. You can sit on the chair while lowering it; it seems best to get off the chair while raiding it. It lowers to where the seat is 28 inches off the floor. It rises to 22.5". The seat is 17.5" wide x 16.25" front to back [the assembled chair is 18.5" front to back]. The back rest top to the floor is 34". The wheel base is about 20" at its widest point, before adding the wheel casters. With their standard wheels the width is about 21" to 21.5". With the Lifelong brand wheels, it will have a width of 21" to 22.5", depending on how the rotating wheel base is turned. All in all, a good experience. As I wrote, these are my initial impressions [I've only had the chair one day]. My intention is to use it daily as a dining chair. I will add to this review as time goes by [e.g., in ~ six months], to indicate how well this product does long-term and with moderately heavy use. I'd appreciate seeing more former reviewers do the same.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2023
P
Verified Purchase
phase_locked
Lexington, US
★★★★★ 5
Rock bottom price, better than rock bottom quality
Color: Black
tl;dr there are definitely better chairs available, even better chairs that aren't that much more money, but if rock bottom is your price target, this one is hard to beat. I bought my 7-year-old a $30 task chair at Target even knowing it's weight limit of 150 pounds implied it was of very, uh, questionable construction. He weighs 50 pounds though so I figured it'd be fine for occasional use for him. It was basically trash, however. I found this instead and it's pretty solid for $60 delivered. The instructions are clear and easy to follow. The actual assembly is as easy as it gets for a task chair (snap casters in, put in a couple screws). Be aware that the seat base is 100% plastic, although I'd be astounded if anyone used cast aluminum for a seat base anywhere close to $100. It is not _particularly_ comfortable, ergonomic, or well made, although it is of slightly better construction than I was expecting. I'm 5' 11" and 200 pounds and the word I'd use to describe sitting on it is "acceptable". I suspect the seat foam is easily the weakest link regarding longevity if used by an adult. The real benefit here is that $60 _feels_ like the correct price for a chair of this quality, whereas a local big box store is going to want close to double that, especially without a "sale" going on.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2026
I
Verified Purchase
ILoveMyKids
Draper, US
★★★★★ 5
Easy to assemble, and comfortable!
Color: Blue
I bought this chair for my teenaged son, who has a small student's desk in his room (also ordered and assembled at the same time). This fits perfectly for the small desk, and is reasonably comfortable for a medium-sized adult, teenager, or older child. Once put together, the chair itself appears to work flawlessly, seems comfortable enough, the height is easily adjustable, and of course -- the most important part, according to my son -- "spins silently 'round and 'round really fast for a long time." The blue color is a nice, deep blue hue that works well for him and makes it stand out a little more than your average black chair. I was able to assemble it fairly quickly without issues. My son uses it to sit in for his schoolwork and computer gaming/programming/hobbies at his desk, etc. and he says it's comfortable, even after sitting in it for 1-2 hours at a time. With this type of chair, you're getting exactly what you pay for and what you see in the pictures. No more, no less. The price is fairly reasonable, it feels sturdy, and if you're looking for an easy and simple office chair for light task work at a computer desk for a teenager or college student with limited space, this is an easy win. While it's not the smallest office chair out there, it's certainly not a large one, either. I am a medium-sized woman at 5'4", and my bottom doesn't hang off of it; that said, a taller/bigger person might want to look into something a little larger for comfort, if they have the space for it. My son is 5'6" (and growing) and slim, so it works perfectly well for him. My husband, who is larger and taller than us, sat in it and said it didn't feel bad...but he was unsure how comfortable it would be sitting in it for longer stretches of time. So...your mileage may vary. Overall, this was exactly what we were looking for and precisely what we expected for this product, so we're happy. I will update this review should anything change.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2019
I
Verified Purchase
ibkaren
Los Angeles, US
★★★★★ 5
Great small rolling desk chair.
Color: Black
Small footprint for small office. Comfortable. Nice back support and super easy to assemble. Told my 300lb son he’s not to sit on it. It’s my chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026
X
Verified Purchase
XILEX
Lexington, US
★★★★★ 3
Good as a task chair, but terrible for long-term sitting
I have revised and updated this review after two years after getting a replacement chair, downgrading it from 5 stars to 3 stars. I have owned an office chair from Staples for two years. It was a $200 office mesh chair. It seemed pretty comfortable when sitting in it at the store. Unfortunately, it turned out to be uncomfortable for long sitting duration, I seemed to end up slouching often because it wasn't very supportive. The seat depth was probably longer than optimal for my legs. The mesh seating was not supportive. With these issues, I thought a task chair would be more useful. But I didn't want to spend so much money on a chair again, so here comes Amazon to the rescue. This chair allows me to sit comfortably with a reasonable seat depth, so I'm now able to sit with proper posture. The foam base initially felt better than the mesh base. This all led to a 5 star rating. After a year and a half, however, it has come to my realization that the foam seating is terribly inadequate for long periods of sitting. Maybe after a year the foam was worn out to the point that it was no longer supportive. After long periods of sitting, I could feel the wood support base. I tried a seat cushion to no avail. In the end, I got rid of this chair and purchase a chair from one of the high-end office ergonomic chair manufacturers. It cost 10x more than the Amazon chair, but it's night and day with regards to being comfortable. It is worth the cost to protect my back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 21, 2019

recommand products

Glass Geometric Terrarium with Door Enclosure, Black Plastic Mesh Vent for Insects, Snail, Jumping Spider, – NCYPgarden
29.53
Sansevieria masoniana 'Whale Fin'
21.98
Sansevieria Silver Bat
20.89
Sansevieria Tough Lady Care
21.68
Sansevieria 'Black Coral'
23.73